Simple DC Remote control


These basic controls can be used to simplify the installation of ether a DC powered CF-15 or our EP and XD lines. They contain the recommended 'automatically resetting' motor protection for our pumps as well as a relay to handle the high current. They are protected from voltage spikes by varistors to handle switching transients and are packaged in a rugged, durable 4 inch ABS enclosure. Once installed a simple contact closure to ground causes the pump to run so there is no need to run anything but a single light gauge ground wire to the remote operating station.

DCKitAssem400 (75K)

Variants

The differences between the three units are the voltage rating of the relay and the current rating of the circuit breaker.

Name Voltage Amp. Raiting
SCD1215 12 15
SCD2415 24 15
SCD2450 24 50

Links to SCD Series PDF Data Sheet

Direct shaft couplings used in most Varna pumps eliminate the cost, bulk and limited life associated with traditional 'soft' couplings. While it takes careful design and precision manufacturing methods to get this to work, it produces a superior pump in all respects.


Customer Feedback "Job extremely well done! Love the system man and my engines thank you."
Chief Marine Engineer: Garet Urban of NOAA ship Pisces


Article Link
Do You Need to Prelube Your Engine Installation?


We believe the less the end user has to think about our product the better job we did.

Give us a call!

Let's talk about what VARNA Products can do for you.

made_in_usa_brand_80

Home | Products | Applications | Contact
888.676.7770 | 2018