The EP-4 pump is designed from the ground up to be the ideal prelube oil pump for diesel and natural gas Engine Prelube. It performs well with high viscosity oils down to very cold temperatures. As a positive displacement pump it will self prime and is more efficient and quieter than a gear pump.
The EP-4 is powered by a self-contained TENV motor rated for both 12 and 24 Volts DC power systems. Both voltages are capable of pressures in excess of 60 psi (4 bar).
These pumps also incorporate a self-contained low loss check valve to prevent backflow. This is a critical component in any prelube system so that when the main oil pump is running it cannot spill pressure through the prelube system. By including it in the pump the EP-4 reduces the cost of the prelube system as a whole. These pumps are more quiet than a gear design due to their "whisper vane" pump technology. Call for a trial unit today.
|Feature and Specifications Comparison|
|Integrated low loss check valve|
|Whisper-Vane positive displacement vane technology, Self Priming|
|Suction port SAE straight thread O-ring size:|
|Discharge port SAE straight thread O-ring size:|
For a PDF Data Sheet on this pump
For info. about Prelube and what it can do for your engine Click Here.
For larger, more sophisticated installations that have AC or compressed air power available the VARNA CF-15 prelube pump mounts to any 56C-Face motor.
To inquire about any of our pumps Click Here, or Call 888-676-7770.
Compact is a design criteria that many pump manufactures ignore as too costly. Varna pumps are small because some of our customers are space constrained, but also because it yields a better pump of any use. By eliminating shaft couplings and extra space Varna pumps are more reliable, easier to install and less costly to ship.
Customer Feedback "It was absolutely perfect - bolt in - set it and forget it!"
We believe the less the end user has to think about our product the better job we did.
Give us a call!
Let's talk about what VARNA Products can do for you.